6” Long Bed Jointer with Helical Cutter Head - (IJ-666-HH)
Stock Number:
BA9-1021089
$2,645.00
Enhanced Bullet 1:
6 " width
Enhanced Bullet 2:
66 " table length
Enhanced Bullet 3:
4 row spiral cutter
Enhanced Bullet 4:
1.5 hp motor
Product Overview
With a 66” table, this helical head bed jointer gives you extra support and delivers true cuts. A 1.5 hp motor spins at 5,000 rpm with enough strength to tackle 6”-wide pieces of hardwood.
Covered by a 1-year parts warranty. Includes lifetime technical support by phone. Questions? Not sure which machine is right for you? Call us at 1-920-684-4990and talk to a knowledgeable Baileigh representative.
Runs on 110-volt or 220-volt single-phase power
Classic wedge bed design ensures many years of simple, reliable operation
Turn the wheel on infeed table to adjust the cutting depth up to ⅛” in seconds
You can also set your own minimum and maximum depth stops
Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining
Includes a large 4” x 38” fence with stops at 90° and 45° right and left
Comes standard with a 2.5” cutter head, equipped with a 4 row spiral cutter head with 4 sided inserts
Cast aluminum safety guard protects you from the cutter head when it’s not in use
4” dust port makes it easy to hook up your dust collection system and suck wood dust right out of the jointing machine
Stock Number | BA9-1021089 |
---|---|
Cutterhead Diameter (In.) | 2-1/2" |
Dust Port Outside Diameter (In.) | 4 |
Fence Size (L x H) (In.) | 4" x 38" |
Model Number | IJ-666-HH |
Motor Phase | Single |
Motor Voltage (V.) | 110 or 220 |
Number of Knives | 28 |
Prop 65 | Cancer and Reproductive Harm |
Max.Rabbeting Capacity (In.) | 1/2" |
Rabbeting Ledge (In.) | 3-1/2" x 8-5/8" |
Type of Cutterhead | Helical Head |
Warranty | 1 Year |
Gross Weight | 420.0 |
Write Your Own Review