Baileigh Precision Lathe PL-1640
Stock Number:
BA9-1006140
$26,999.00
Enhanced Bullet 1:
_x000D_
Mitutoyo DRO_x000D_
Enhanced Bullet 2:
Heavy cast iron base_x000D_
Enhanced Bullet 3:
40" between centers_x000D_
Enhanced Bullet 4:
30 to 2000 rpm_x000D_
Product Overview
The perfect combination of size and power, this precision lathe includes a Mitutoyo DRO, a collar stop system, and a heavy cast iron base to ensure accuracy.
Questions? Not sure what’s the best metal lathe for you? Call us at 1-920-684-4990 and talk to a friendly Baileigh expert.
12 speeds from 30 to 2,000 rpm with a 7.5 hp motor which runs on 220-volt 3-phase power
Factory-installed Mitutoyo DRO (digital readout) helps you make precise cuts with no assembly required
Precision ground and hardened ways will withstand years of use in any metalworking shop
⅝” square indexing tool post with a steady rest and follow rest
Collar system lets you set stops for repeat parts
This is a gap lathe, so you can remove a section of the slide to fit a slightly larger diameter
Full cast iron base, integrated into the mainframe, makes this one of the most rigid lathes on the market
Comes standard with 3-jaw chuck, emergency foot brake, and Halogen work light
Headstock chuck guard with automatic safety switch and flood coolant system (with backsplash guard) to prolong machine life
| Stock Number | BA9-1006140 |
|---|---|
| Bed Height (In.) | 12.20" |
| Center Height | 7.086 |
| Compound Rest Width | 4.33 |
| Compound Slide Travel (In.) | 4.75" |
| Range of Cross Feeds (MMPR) | 40 / .015 – .320 mm / rev. |
| Cross Slide Travel (In.) | 9 |
| Cutting Tool Max Section | .625" x .625" |
| Distance Between Centers (In.) | 40" |
| Input Power | 220V / 3-phase |
| Lead Screw Diameter | 1.25 |
| Leadscrew Thread Pitch | 4 T.P.I. |
| Longitudinal Feeds Imperial Qty Speed | 40 / .0012" – .0252" / rev. |
| Longitudinal Feeds Metric Qty Speed | 40 / .032 – .640 mm / rev. |
| Model Number | PL-1640 |
| Prop 65 | Cancer and Reproductive Harm |
| Quill Taper | Morse #6 |
| Shipping Dimensions (L x W x H) (In.) | 90x37x81 |
| Spindle Bore (In.) | 2.0625" |
| Spindle Taper with Sleeve | Morse #4 |
| Swing Over Bed (In.) | 16" |
| Swing Over Cross Slide (In.) | 9.45" |
| Swing Through Gap (In.) | 23.42" |
| Table Length (In.) | 74.75" |
| Tailstock Spindle Travel (In.) | 4.75" |
| Taper in Tailstock Spindle | 2.125" |
| Warranty | 1 Year |
| Weight (Lbs.) | 3940 |
| Width of Bed (In.) | 11.81" |
| Gross Weight | 3720.0 |
| Net weight | 3720.0 |
| Speed (rpm) | 30 – 2000 rpm |
| Threads Diametrical Quality Speed (D.P.) | 32 / 4–32 D.P. |
| Threads Imperial Quality Speed (T.P.I.) | 40 / 2–56 T.P.I. |
| Threads Metric Quality Speed (mm pitch) | 53 / .4–14 mm pitch |
| Threads Modular Quality Speed (M.P.) | 44 / .4–7 M.P. |
Write Your Own Review
