Horizontal Press Brake - (HPB-78NC)
Call 920-684-4990 for availability
Stock Number:
BA9-1004720
$39,999.00
.
Enhanced Bullet 1:
78 tons of pressure
Enhanced Bullet 2:
Programmable NC controller
Enhanced Bullet 3:
13.78" stroke length
Enhanced Bullet 4:
220V 3-phase power
Product Overview
Making smaller parts? This Baileigh horizontal press brake can save time and money, since material lies on the table and stays square. The HPB-78NC industrial hydraulic press brake can shear, bend, punch, and straighten.
Also available in a 45-ton horizontal press brake machine.
Recommended for:
*Full industrial production, including shipbuilding yards, boiler manufacturers, nuclear applications.
*Making parts that are thick, but not wide (die size is limited).
Covered by a 1-year parts warranty. Includes lifetime technical support by phone. Questions? Not sure which press brake is right for you? Call us at 1-920-684-4990 and talk to a Baileigh expert.
Electronic encoders make this hydraulic press brake accurate to +/- .002”
Control the bending stroke with 2 buttons or with the foot pedal, so your hands are free to guide the material. Numerical control (NC) programmer can store up to 50 programs with 10 bends per program
You can adjust the pressure of the hydraulics for your material. You can also run the machine in a manual mode for one-off projects as well as set-up
Robust manual back gauge bolts to the machine and helps with repeatability and product counter makes production runs more efficient
Machined table, 37.4” high, keeps your material perfectly level. No need to hold one side and hope it’s lined up!
Quick-release tooling system makes changes fast and simple. Just turn the handle and the post will lift. The V die slides in and out
Includes a set of single-V tooling (V-opening die and V post). Also accepts attachments for punching, straightening, shearing, and even pipe bending
Many additional tooling sets are available. We can find the right one for your project or create a custom set, if necessary
4,580-pound steel frame, made from 4 powerful pieces of inch-thick flat bar, will keep results accurate for many years and won’t flinch under pressure
Industrial-grade hydraulic system is located on top of the machine to reduce flex and shelving in the front can hold tooling and items you might need on a daily basis
| Stock Number | BA9-1004720 |
|---|---|
| Approach Speed | 1.69" / sec. |
| Approx. Pressure (Tons) | 78 tons |
| Fixture Holes | (1) @ 4.646" dia. / (3) @ 3.268" dia. |
| Horse Power (HP) | 7.5000 |
| Input Power | 220V / 3-phase |
| Minimum Return Speed (In./Sec) | .55" / sec. |
| Model Number | HPB-78NC |
| Motor (HP) | 7.5 hp |
| Prop 65 | Cancer and Reproductive Harm |
| Punch Work Height (In.) | 11.81" |
| Shipping Dimensions (L x W x H) (In.) | 81x38x61 |
| Stroke Length (In.) | 13.78" |
| Table Height (In.) | 37.4 |
| Warranty | 1 Year |
| Weight (Lbs.) | 4580 |
| Gross Weight | 4580.0 |
| Net weight | 4580.0 |
| Volts | 220V |
Write Your Own Review
