Industrial Planer IP-208
Stock Number:
BA9-1004940
$4,008.60
Enhanced Bullet 1:
20 " width
Enhanced Bullet 2:
8 " maximum cutting height
Enhanced Bullet 3:
5 hp motor
Enhanced Bullet 4:
5000 rpm
Product Overview
This 20”-wide thickness planer can quickly turn rough lumber into boards with smooth faces. Heavy cast iron and steel construction keeps the material steady and supported.
We recommend adding a spiral cutter head with rotatable carbide teeth that stay sharp longer.
Questions? Not sure which machine is right for you? Call us at 1-920-684-4990 and talk to a knowledgeable Baileigh representative.
Manual
Straight 4-knife cutter head comes standard
Runs on 220-volt single-phase power with a 5 hp motor that turns the cutter head at a whopping 5,000 rpm
Fully cast iron 20” x 25.75” table with 15” extensions can expand to an impressive 20” x 55.75”.
8” maximum and .25” minimum cutting height with a maximum ⅛” cut depth
2 speeds allow you to pick what’s right for your project: 20 feet per minute and 16 feet per minute
Cast iron frame on the top and bottom stabilizes the machine and helps it last longer
Handwheel with a scale on the side of the planer lets you precisely adjust the height in seconds
Anti-kickback fingers grip the material so it’s less likely to shoot back out if the blades get jammed
Built-in wheels on the base allow you to move the machine around your shop and store it
Magnetic safety switch automatically turns the machine off in case of a power outage or a problem with the current
| Stock Number | BA9-1004940 |
|---|---|
| Cutterhead Diameter (In.) | 3-1/4" |
| Dust Port Outside Diameter (In.) | 5 |
| Model Number | IP-208 |
| Motor Phase | 1 |
| Motor Power (HP) | 5 |
| Motor Voltage (V.) | 220V Single Phase |
| Number of Knives | 4 |
| Prewired Voltage (V.) | 220 |
| Prop 65 | Cancer and Reproductive Harm |
| Table Height from Floor (In.) | Manual |
| Type of Cutterhead | Straight Knife |
| Warranty | 1 Year |
| Gross Weight | 840.0 |
Write Your Own Review
