Jointer/Planer - (JP-1898-NC)
Stock Number:
BA9-1004968
$23,401.00
Enhanced Bullet 1:
18 " width
Enhanced Bullet 2:
98" table length
Enhanced Bullet 3:
Includes spiral cutter head
Enhanced Bullet 4:
7.5 hp motor
 | Click here to explore affordable leasing options today! |
Product Overview
Built from steel and cast iron, this numerically controlled 18” Jointer/Planer saves space and does the work of 2 machines without compromising on quality.
Order this heavy-duty jointer planer today!
Questions? Not sure which machine is right for you? Call us at 1-920-684-4990 and talk to a knowledgeable Baileigh representative.
7.5 hp motor has enough strength to cut and smooth 18” boards with a 4.75” helical cutter head (included) that spins at 5,700 rpm
6 rows of rotatable carbide blades on the spiral cutter head will remain sharp for much longer than a straight-knife cutter could
Baileigh JP-1898-NC Jointer/Planer runs on 220-volt 3-phase power with a 98” table that supports your boards, ensures true, straight cuts
Digital controller lets you adjust the height of the 63” x 18” jointer table. Control panels with big stop and start buttons are simple to use
Programmable system for the planer lets you enter your desired spacing, and machine takes care of the rest and rubber infeed and outfeed rollers reduce friction and keep boards moving smoothly
Parallelogram-style jointer bed helps prevent accidents by maintaining a tight, uniform gap between the table and the cutter—regardless of the table height
5/16” maximum cutting depth at the jointer station with a fence that can tilt up to 45° for edge joining
71” x 18” planer table (with a large resting area on both sides) makes it easier for you to maneuver the material
Variable infeed speed from 16 to 50 feet per minute lets you fine-tune to fit the wood you’re working with and get a better finish
2 large 6” dust ports, one for each function, can connect to your dust collector so your shop stays pristine with safe, breathable air
| Stock Number | BA9-1004968 |
|---|---|
| Cutterhead Diameter (In.) | 4.75' |
| Dust Port Outside Diameter (In.) | 6 |
| Fence Tilt (Deg.) | 45° |
| Model Number | JP-1898-NC |
| Motor Phase | 3 |
| Motor Power (HP) | 7.5 |
| Motor Voltage (V.) | 220 |
| Number of Knives | 6 Rows of Rotatable Carbide Blades |
| Prop 65 | Cancer and Reproductive Harm |
| Table Height from Floor (In.) | Digital Control |
| Type of Cutterhead | Spiral Cutter Head |
| Warranty | 1 Year |
| Gross Weight | 3100.0 |
Write Your Own Review
