Abrasive Notcher TN-400
Stock Number:
BA9-TN400
$6,119.00
Enhanced Bullet 1:
.75 " to 2 " tube capacity
Enhanced Bullet 2:
Up to 60Deg. angle adjustment
Enhanced Bullet 3:
79 " x 4 " belt
Enhanced Bullet 4:
Self-centering vise
Leasing starts at $174 with Click LeaseYou are able to calculate lease price on Click Lease's website.
Normally it takes no longer than 3 minutes.
Product Overview
The TN-400 abrasive tube notcher uses a self-centering vise to guarantee the right belt positioning every time. This machine will help you perfectly cope thin wall tubing.
Manual
Made in the USA.
3 hp motor runs on 220-volt single-phase power.
Ideal for coping the ends of .75” OD to 2” OD tubing or pipe.
Notches at almost any angle up to 60°.
79” x 4” belt spins at a speed of 5420 feet per minute.
V-block design of the vise jaws keeps the tube or pipe centered with the notching spindle and holds it securely.
Vise carriage rides on a smooth Thompson® shaft assembly during the notching cycle.
Pivoted control lever presses the material press into the belt.
Quick-change tooling system allows you to swap out the mandrel in seconds.
Comes standard with 1.25” pipe mandrel.
| Stock Number | BA9-TN400 |
|---|---|
| Belt Speed (FPM) | 5420 |
| Model Number | TN-400 |
| Motor (HP) | 3 hp |
| Notch Capacity (in./OD) | .75" - 2" |
| Prop 65 | Cancer and Reproductive Harm |
| Warranty | 1 Year |
| Gross Weight | 480.0 |
| Motor Phase | Single |
| Shipping Weight (Lbs.) | 480 |
| Volts | 220 |
Write Your Own Review
